This is to protect your network from an endless loop of network packages that couldn’t find their destination. Each hop (network device) that the packet comes through lowers the TTL until it reached 0. This is not in ms, but how many hops a network packet can take before it’s dropped.

TTL is how long a packet should live (Time to Live).Time is how long it took for the response to come back (latency), in this case, 1ms.We can change this by using the -l switch. Bytes indicates the size of the packet that was sent.For each packet we see the result, in this case, 192.168.10.254 has replied in 1ms. So if we look at the result above, we see some different values, but what do they all mean? By default, ping will send 4 packets of 32 bytes to the requested Ip Address. This will test every hop between your computer and the network device that you try to reach. You can also test all the network devices with one command, pathping. We can ping the IP Address of one of the DNS servers from Google at 8.8.8.8. The easiest option to test if you can reach the internet is to ping google. If we can reach the modem as well, then the last step is to ping something on the internet. The next step is to ping the modem, at 192.168.0.1. During the ping you will see the results of each packet that is sent and a summary: Pinging 192.168.10.254 with 32 bytes of data: Reply from 192.168.10.254: bytes=32 time=1ms TTL=64 Reply from 192.168.10.254: bytes=32 time=1ms TTL=64 Reply from 192.168.10.254: bytes=32 time=1ms TTL=64 Reply from 192.168.10.254: bytes=32 time=1ms TTL=64 Ping statistics for 192.168.10.254: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1msĪs you can see in the results we have a succesvol connection to the router. This command will send 4 packets of 32 bytes from your computer to router. You can find the IP Address of your router by typing ipconfig in the command prompt or PowerShell window:Ĭheck if you can reach to router by typing: # replace the IP Address with the address of your router The first thing we do is to ping the Router at 192.168.10.254.

Taken the example above, let’s say we are working on the laptop and we want to test if have a good wireless network connection.

Before we can troubleshoot we first need to have a good understanding of our network layout. The ping test cmd is primarily used to troubleshoot network-related issues. Troubleshoot network issues with cmd ping

Type Ping followed by the IP Address of the device you want to ping.įor example, if you want to test your connection to the internet, type: ping 8.8.8.8.

Select either Command Prompt or Windows PowerShell.

Press the Windows Key + X or Right Click on the start menu.

192.168.1.1.64 admin